Intercall 600 Nurse call system
The Intercall 600 is a communication system that alerts staff to patient calls and emergencies designed to be user friendly for both staff and patients alike.
A simple two-wire addressable system with five different levels of alert, programmable text and call logging.
A multitude of add on accessories are available making this series the care providers 1st choice call system.
Some features
Staff Present Mode.
When members of staff enter a room, they must press the Reset button on the call point. The
call point is now in ‘Staff Present’ mode and the Re-assurance light will show a constant green.
Other members of staff can now locate them, by pressing the ‘Show Staff’ button on any display
unit. When they leave the room, they should press the Reset button again, this tells the system
they are no longer in the room & the Re-assurance light is off.
Staff Emergency/Crash Call.
Staff emergency call can be generated at any time by pressing the Call Button and the Reset
Button simultaneously (or pressing the Emergency Button). To confirm this action the Reassurance light will showing a rapid red flashing light. To cancel the emergency call, press the
Reset Button once, the call point is now in staff present mode with the Re-assurance light
showing constant green. To cancel the staff present mode, press the Reset Button again until
the Re-assurance light is off. On early Intercall 600 systems, unanswered standard calls could
be set to time-out and automatically convert to emergency calls.
Staff Assistance Call.
Staff assistance call can only be generated when the call point is in staff present mode and the
Re-assurance light showing constant green. Pressing the Call button will generate an assistance
call and the Re-assurance light will alternate red, then green, once a second to confirm this
action. To cancel the assistance call, press the Reset Button once. The call point is now in staff
present mode with the Re-assurance light showing constant green. To cancel the staff present,
press the Reset Button again until the Re-assurance light is off.
Call Accepted.
To avoid several members of staff from responding to a single call, calls may be accepted from
any display unit. To accept a call, wait until the call you wish to accept is on the top line of the
display and press the Accept Button. The call point re-assurance light will flash green to let the
resident know that staff are on their way. The call point will return to the calling condition if the
call point is not reset within a pre-set time period. Only standard calls and assistance calls can
be accepted.