Vehicle Barriers & Gates

Vehicle Barriers and Gates

Rising Road Kerbs

Click for Larger Image

Sliding Gate

Click for Larger Image

Integra Systems can install a variety of entrance solutions, the options range from a cost effective manual barrier through to a fully automatic electric or hydraulic barrier.

Our range of barriers are microprocessor controlled and are designed for high cycle use. Should a barrier not provide the security you require, we can design and install a traditional hinged gate with either rams or underground drive units.

An alternative to the traditional gates is a cantilever gate which slides open as opposed to the traditional gates which require a 90 degree space to open.

Control of the entrance solution can be provided from many variables, like Intercoms, Wireless remote, Access Control or Direct control from a push button panel.

Building control can be provided by Turnstiles, Half height gates, Fast lane
barriers and offers the ultimate in the control of access into buildings.

Rising Road Kerbs

Hydraulically operated.

Manufactured from welded rectangular hollow section & durbar top plate.

Operating supply 230V single phase.

Can be controlled using almost any type of access control.

Emergency lower incorporated as standard.

Operating times of 4 to 6 seconds dependant on version.

Available in up to 5 metres in width and 800mm in height.

Galvanised and painted in black/yellow (high visibility).

Sliding Gates

Heavy Duty Automatic Sliding Gate employs a revolutionary – Patent Applied For - GB0713973.6 - External Friction Drive Mechanism ensuring a smooth, consistent, and quiet gate movement. As well as being the main drive, the External Friction Drive Mechanism also acts as the primary support roller of the gate ensuring a consistent contact between the drive roller and the underside of the lower beam. This is assisted by the dual stabilising support wheels located on either side of the drive roller.

A Manual Release Mechanism, concealed within the lockable housing unit, is included as standard, allowing manual control of the gate in the event of a power failure.

An additional fully adjustable support unit is positioned in the runback area at a distance of approximately 40% of the length of the main lower beam to aid in the support of the gate when it is fully closed. Towards the back of the gate’s opening area a floor mounted support roller handles the weight of the gate in the fully open position.

Proximity sensors are used to indicate the start and end of the travel cycle.

Dual-height photo cells are fitted as standard, for safety to pedestrians and vehicles, on all Heavy-Duty Automatic Sliding Gates. A Programmable Logic Controller, operated via an inverter, allows the user to adjust the speed to their individual requirements.

Sales: 0151 424 4141

Fax: 0871 242 2213

E-Mail: sales@integra-systems.co.uk

Protecting business and homes for total security